vSphere VMFS数据存储概念和操作
https://kb.vmware.com/s/article/2091600
FAQ: Support statement for 512e and 4K Native drives for VMware vSphere and vSAN (2091600)
Device Sector Formats
ESXi supports storage devices with traditional and advanced sector formats. In storage, a sector is a subdivision of a track on a storage disk or device. Each sector stores a fixed amount of data.
This table introduces different storage device formats that ESXi supports.
| Storage Device Format | ESXi Software Emulation | Logical Sector Size | Physical Sector Size | VMFS Datastore |
|---|---|---|---|---|
| 512n | N/A | 512 | 512 | VMFS5 and VMFS6 (default) |
| 512e | N/A | 512 | 4096 | VMFS5 and VMFS56 (default) Note: Local 512e storage devices do not support VMFS5. |
| 4Kn | 512 | 4096 | 4096 | VMFS6 |
ESXi supports traditional 512n storage devices that use a native 512-bytes sector size. Due to the increasing demand for larger capacities, the storage industry has introduced advanced formats, such as 512-byte emulation, or 512e. 512e is the advanced format in which the physical sector size is 4096 bytes, but the logical sector emulates 512-bytes sector size. Storage devices that use the 512e format can support legacy applications and guest operating systems. These devices serve as an intermediate step to 4Kn sector drives. Another advanced format that ESXi supports is the 4Kn sector technology. In the 4Kn devices, both physical and logical sectors are 4096 bytes (4 KiB) in length. The device does not have an emulation layer, but exposes its 4Kn physical sector size directly to ESXi. ESXi detects and registers the 4Kn devices and automatically emulates them as 512e. The device is presented to upper layers in ESXi as 512e. But the guest operating systems always see it as a 512n device. You can continue using existing VMs with legacy guest OSes and applications on the host with the 4Kn devices. ESXi supports only local 4Kn SAS and SATA HDDs. ESXi does not support 4Kn SSD and NVMe devices, or 4Kn devices as RDMs. ESXi can boot only from a 4Kn device with UEFI. You can use the 4Kn device to configure a coredump partition and coredump file. Only the NMP plug-in can claim the 4Kn devices. You cannot use the HPP to claim these devices. With vSAN, you can use only the 4Kn capacity HDDs for vSAN Hybrid Arrays. For information, see theAdministering VMware vSANdocumentation. Due to the software emulation layer, the performance of the 4Kn devices depends on the alignment of the I/Os. For best performance, run workloads that issue mostly 4K aligned I/Os. Workloads accessing the emulated 4Kn device directly using scatter-gather I/O (SGIO) must issue I/Os compatible with the 512e disk.512-Byte Native Format
512-Byte Emulation Format
4K Native Format with Software Emulation
Determine Device Format
To determine whether the device uses the 512n, 512e, or 4Kn format, run the following command.
esxcli storage core device capacity list
Device Physical Blocksize Logical Blocksize Logical Block Count Size Format Type -------------------- ------------------ ----------------- ------------------- ----------- ----------- naa.5000xxxxxxxxx36f 512 512 2344225968 1144641 MiB 512n naa.5000xxxxxxxxx030 4096 512 3516328368 1716957 MiB 4Kn SWE naa.5000xxxxxxxxx8df 512 512 2344225968 1144641 MiB 512n naa.5000xxxxxxxxx4f4 4096 512 3516328368 1716957 MiB 4Kn SWE
推荐本站淘宝优惠价购买喜欢的宝贝:
本文链接：https://hqyman.cn/post/4873.html 非本站原创文章欢迎转载，原创文章需保留本站地址！
微信支付宝扫一扫，打赏作者吧～休息一下~~
官码2024000195号
萌ICP备20248119号
