HQY 一个和谐有爱的空间

When trying to join through the GUI or SSH I am faced with this error. 192.168.0.50 & 192.168.0.201 can ping eachother
起因是安装时，网络的位置选错了配置，造成hostname里面的主机名绑定了一个192.168.100.2

Code:

detected the following error(s): * local node address: cannot use IP '0.48.150.92', not found on local node! TASK ERROR: Check if node may join a cluster failed!

As you can see the join IP is shown incorrectly below


686b9585d5dd8a801f7cd247daa4329f.png

harmonyp · Jan 26, 2021 at 14:15

" style="box-sizing: border-box; display: inline-block; max-width: 100%; color: rgb(20, 22, 24); font-family: "Open Sans", Roboto, -apple-system, BlinkMacSystemFont, "Segoe UI", Oxygen, Ubuntu, Cantarell, "Fira Sans", "Droid Sans", "Helvetica Neue", sans-serif; text-wrap: wrap; background-color: rgb(255, 255, 255); cursor: pointer;">

root@3173716:~# pvecm status
Code:

Cluster information ------------------- Name:             france Config Version:   1 Transport:        knet Secure auth:      on Quorum information ------------------ Date:             Tue Jan 26 13:04:54 2021 Quorum provider:  corosync_votequorum Nodes:            1 Node ID:          0x00000001 Ring ID:          1.23 Quorate:          Yes Votequorum information ---------------------- Expected votes:   1 Highest expected: 1 Total votes:      1 Quorum:           1 Flags:            Quorate Membership information ----------------------     Nodeid      Votes Name 0x00000001          1 192.168.0.50 (local)

root@3173716:~# ip address
Code:

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00     inet 127.0.0.1/8 scope host lo        valid_lft forever preferred_lft forever     inet6 ::1/128 scope host        valid_lft forever preferred_lft forever 2: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master vmbr0 state UP group default qlen 1000     link/ether d0:50:99:d8:8e:df brd ff:ff:ff:ff:ff:ff 259: tap406i0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master vmbr0 state UNKNOWN group default qlen 1000     link/ether 1e:21:28:67:25:1e brd ff:ff:ff:ff:ff:ff 3: eno2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000     link/ether d0:50:99:d8:8e:de brd ff:ff:ff:ff:ff:ff     inet 192.168.0.50/16 scope global eno2        valid_lft forever preferred_lft forever     inet6 fe80::d250:99ff:fed8:8ede/64 scope link        valid_lft forever preferred_lft forever 4: enp0s20f0u8u3c2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000     link/ether 7a:06:b0:b9:1f:cd brd ff:ff:ff:ff:ff:ff 5: vmbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000

/etc/network/interfaces

Code:

auto lo iface lo inet loopback auto eno2 iface eno2 inet static         address 192.168.0.50/16 iface eno1 inet manual iface enp0s20f0u8u3c2 inet manual auto vmbr0 iface vmbr0 inet static         address 51.210.99.xxx/24         gateway 51.210.99.254         bridge-ports eno1         bridge-stp off         bridge-fd 0 iface vmbr0 inet6 static         address 2001:41d0:303:xxxx::1/128         gateway 2001:41d0:303:d9ff:ff:ff:ff:ff         post-up /sbin/ip -f inet6 route add 2001:41d0:303:d96ff:ff:ff:ff:ff dev vmbr0         post-up /sbin/ip -f inet6 route add default via 2001:41d0:303:d96ff:ff:ff:ff:ff         pre-down /sbin/ip -f inet6 route del default via 2001:41d0:303:d96ff:ff:ff:ff:ff200         pre-down /sbin/ip -f inet6 route del 2001:41d0:303:d96ff:ff:ff:ff:ff dev vmbr0 /etc/hosts 127.0.0.1       localhost 192.168.0.50 3173716.mydomain.com 3173716 192.168.0.201 3184220.mydomain.com 3184220 51.210.99.xxx 3173716.mydomain.com 3173716 ::1     localhost       ip6-localhost   ip6-loopback ff02::1 ip6-allnodes ff02::2 ip6-allrouters

/etc/pve/corosync.conf

Code:

logging {   debug: off   to_syslog: yes } nodelist {   node {     name: 3173716     nodeid: 1     quorum_votes: 1     ring0_addr: 192.168.0.50   } } quorum {   provider: corosync_votequorum } totem {   cluster_name: france   config_version: 1   interface {     linknumber: 0   }   ip_version: ipv4-6   link_mode: passive   secauth: on   version: 2 }

On my second node trying to join:

root@3184220:~# ip address
Code:

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group defaul                                                                                                                                                             t qlen 1000     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00     inet 127.0.0.1/8 scope host lo        valid_lft forever preferred_lft forever     inet6 ::1/128 scope host        valid_lft forever preferred_lft forever 2: enp1s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master vmbr0 st                                                                                                                                                             ate UP group default qlen 1000     link/ether a8:a1:59:36:54:42 brd ff:ff:ff:ff:ff:ff 3: enp1s0f1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group                                                                                                                                                              default qlen 1000     link/ether a8:a1:59:36:60:ce brd ff:ff:ff:ff:ff:ff     inet 192.168.0.201/16 brd 192.168.255.255 scope global enp1s0f1        valid_lft forever preferred_lft forever     inet6 fe80::aaa1:59ff:fe36:60ce/64 scope link        valid_lft forever preferred_lft forever 4: vmbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP grou                                                                                                                                                             p default qlen 1000     link/ether a8:a1:59:36:54:42 brd ff:ff:ff:ff:ff:ff     inet 135.125.2.xxx/24 brd 135.125.2.255 scope global vmbr0        valid_lft forever preferred_lft forever     inet6 2001:41d0:203:966e::1/128 scope global        valid_lft forever preferred_lft forever     inet6 fe80::aaa1:59ff:fe36:5442/64 scope link        valid_lft forever preferred_lft forever

/etc/hosts/

Code:

127.0.0.1       localhost.localdomain   localhost 135.125.2.xxx   3184220.mydomain.com   3184220 192.168.0.50 3173716.mydomain.com 3173716 192.168.0.201 3184220.mydomain.com 3184220 # The following lines are desirable for IPv6 capable hosts ::1     localhost       ip6-localhost   ip6-loopback ff02::1 ip6-allnodes ff02::2 ip6-allrouters

mhmm... i have not really a solution for now (it seems to be a bug) but i can see the reason:


3173716 interpreted as an ip is... 0.48.109.84

so somewhere in the stack the hostname '3173716' gets interpreted as an ipv4 adress...

If it helps I installed Proxmox from Debian10 following https://pve.proxmox.com/wiki/Install_Proxmox_VE_on_Debian_Buster

root@3173716:~# hostname --ip-address
51.210.99.xxx


One thing I have noticed it has /etc/hosts keeps changing when I reboot the server I had to lock the file using

chattr +i /etc/hosts

The following gets added to /etc/hosts

Code:

127.0.1.1       ns3173716.xyz       ns3173716

It's the rDNS record.

推荐本站淘宝优惠价购买喜欢的宝贝:

本文链接：https://hqyman.cn/post/6072.html 非本站原创文章欢迎转载，原创文章需保留本站地址！

休息一下~~